Pilot-Operated Servo Valve
Electric Discharge Machine (EDM)
Electrical discharge machine works by using the erosion caused by the impulse discharge between the electrode and the conductive material, which has been used in the production of dies....
Amplifier
The amplifier is the servo drive for driving and controlling servo valves and proportional valves. It can realize high accuracy control of all kinds of valves. Servo power amplifier can be composed with other hydraulic systems and measuring transducers into an...
Electro-hydraulic Servo Valve
Electro hydraulic servo valve can measure the hydraulic oil according to input signal, then to control position, speed, pressure or force in the electro hydraulic systems (generally the pistons and plungers)....
Electro-hydraulic Proportional Valve
Electro hydraulic proportional valve is a hydraulic component, which can translate electrical signal to displacement signal by an analog electric-machinery converter. When this valve acts, the electric-machinery converter will response the input signal to move...
Grease Injection Valve
Grease injection valve is an equipment that can output high pressure medium quantitatively. It is the most important part of the quantitative filling machine, which can fill many different kinds of high viscosity oil such as lithium grease, calcium soap grease...
Single Axis CNC EDM Machine
Single axis CNC EDM machine uses a single axis (Z-axis) with auto-feeding control system (including servo feed system and parameters control system), other axes are manual control axis (X-axis and Y-axis)....
Three Axis CNC EDM Machine
With auto-feeding control system (including servo feed system and parameters control system), three axis CNC EDM machine has wonderful performance on automation and control precision. It is widely used in the field of mould production for electronic component...
CNC EDM Blade Grinder
CNC EDM grinder is a machine that can produce PCD cutters through grinding. With 4 CNC controlled axes and 2 manual axes, which is used for the complete processing of PCD tipped tools....
Pilot operated servo valve with built-in fieldbus interfaces enable operating parameters to be set, activate the valve and monitor its performance. Different fail-safe options available allow the best fit to the application.
Features
1. Optimized design of valve bodies for high rated flow
2. Integrated digital electronics for high flexibility with fieldbus interface
3. Optional pilot stages allow the best fit to the application
4. Excellent dynamic response due to improved pilot stages
Parameters of Pilot Operated Servo Valve
|
Hydraulic Data |
|
|
Rated Flow |
30 to 1,500 l/min (8 to 395 gpm) @ ∆p 5 bar (75 psi) per land |
|
Maximum Flow |
Up to 3,600 l/min (~950 gpm) ISO size 10 |
|
Maximum Operating Pressure |
350 bar (5,000 psi) |
|
Mounting Pattern |
ISO 4401 Size 05, 07, 08 and 10 (NG 10, 16,
25 and 32) |
|
100% Step Response |
10 to 45 ms @ 210 bar (3,000 psi) |
|
Electrical Data |
|
|
Supply Voltage |
24 VDC (18 to 32 VDC) |
|
Fieldbus Interface |
CANopen, Profibus and EtherCAT |
|
Options |
Analog Signals |
Direct Operated Servo Valve
Pilot Servo Valves with fieldbus interfaces
Pilot Operated Valve
Pressure and Flow Control Valve
Pressure and flow control valve is directly driven by linear force motor: No pilot flow required. Linear force motor with high force range (improves operating limits): No flow limitations....
Programmable Servo Drive
Programmable servo drives offer approved safety functions per EN 61800-5-2 and Safety PLC functions. Configuration, programming and validation is performed with the Moog Servo Drive Software with Safety PLC Functions. This is a module of both the Programmable ...